| MODEL | MACHINE SIZE (Ton) | Fits AdvanceQuip excavators | TORQUE (nm) | WEIGHT (kg) | OUTPUT SHAFT | OUTPUT SHAFT SIZE (mm) | AUX. HYD REQUIREMENTS | HYD COUPLERS | OIL FLOW RANGE (lpm) | OIL PRESSURE RANGE (Bar) | HITCH PICK-UP WIDTH (mm) | HITCH PIN CENTRES (mm) | HITCH PIN DIAMETER (mm) | SPEC SHEET |
| 2000 | 1.0-2.0 | CASE CX19D | 2190 | 47 | Hex | 50.8 | 1 x Pressure, 1 x Return | 1/2″ ISO Poppit QRC, 1 x M, 1 x FM | 25-57 | 70-240 | 120 | 90/105/135/140 | 30 |  |
| 2000 | 2.0-2.9 | CASE CX25D, CX26C | 2190 | 47 | Hex | 50.8 | 1 x Pressure, 1 x Return | 1/2″ ISO Poppit QRC, 1 x M, 1 x FM | 25-57 | 70-240 | 140 | 180 | 35 | |
| 3500 | 3.0-4.0 | CASE CX37C | 3614 | 73 | Hex | 50.8 | 1 x Pressure, 1 x Return | 1/2″ ISO Poppit QRC, 1 x M, 1 x FM | 40-85 | 80-240 | | | | |
| 3500 | 5.0-6.0 | CASE CX60C | 3614 | 73 | Hex | 50.8 | 1 x Pressure, 1 x Return | 1/2″ ISO Poppit QRC, 1 x M, 1 x FM | 40-85 | 80-240 | 165 | 285 | 45 | |
| 8000 | 7.0-8.0 | CASE CX75CSR | 8152 | 116 | Square | 75 | 1 x Pressure, 1 x Return | 1/2″ ISO Poppit QRC, 1 x M, 1 x FM | 70-150 | 80-240 | 200 | 310 | 50 | |
| 15000 | 10.0-14.5 | CASE CX130C, CX145CSR | 15071 | 173 | Square | 75 | 1 x Pressure, 1 x Return | 1″ ISO Screw Couplers, 1 x M, 1 x FM | 80-170 | 80-240 | 275 | 380 | 65 | |
| 25000 | 16.0-23.5 | CASE CX210C, CX235CSR | 24755 | 269 | Square | 75 | 1 x Pressure, 1 x Return | 1″ ISO Screw Couplers, 1 x M, 1 x FM | 80-170 | 160-240 | 340 | 450 | 80 | |
